Mi DSpace
Usuario
Contraseña
Please use this identifier to cite or link to this item: http://hdl.handle.net/UCSP/15779
Title: Identification of PV system model for simulation of MPPT controllers
Authors: Huanca Cayo, Eber
Palo Tejada, Ernesto
Campos Falcon, Victoria
Keywords: Identification (control systems);Maximum power point trackers;Photovoltaic cells;Mppt controllers;PI Controller;PV models;PV panel;PV system;SEPIC converter;Setpoints;Variable loads;Controllers
Issue Date: 2017
Publisher: Institute of Electrical and Electronics Engineers Inc.
metadata.dc.relation.uri: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85039992796&doi=10.1109%2fINTERCON.2017.8079726&partnerID=40&md5=dd53fa2d0b1a7fa7dd2713c94f882713
Abstract: The present paper is part of a larger project which aims to monitor and mitigate dust on the PV systems in the city of Arequipa. Its objective is to present a simplified model for simulating PV panels for the design and project maximum power point tracker - MPPT controllers. With an experimental setup, signals of voltage, current, power, irradiance and temperature were acquired. A SEPIC converter that can be controlled electronically was simulated and implemented for using it as variable load. The PV model identified was subject to simulation considering variations of temperature and irradiance. Through these simulation, a MPP voltage set point function was identified. Finally a PI controller was implemented for MPPT system to simulate the identified PV model. © 2017 IEEE.
URI: http://repositorio.ucsp.edu.pe/handle/UCSP/15779
ISBN: 9781509063628
Appears in Collections:Artículos de investigación

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.